羧基丁苯胶乳改性脲醛树脂胶粘剂的研究

利用羧基丁苯胶乳对脲醛树脂胶粘剂进行改性,同时在脲醛树脂合成过程中加入一定数量的玉米淀粉等改性剂,进一步提高改性脲醛树脂的综合性能,降低生产成本。羧基丁苯胶乳改性脲醛树脂胶粘剂具有游离甲醛含量低、生产工艺简单等特点,生产出的胶合板的胶合强度和甲醛释放量均满足国家标准。     

西南桤木木塑复合材料的研究

采用乙烯基类系列单体——丙烯腈(AN)、甲基丙烯酸甲酯(MMA)、丙烯酸(AA)三元共聚单体注入西南桤木木材中，制成新型的高分子复合材料(AMA—WPC)。单体的注入用满细胞法，聚合用热引发法，并采用添加氯化锌对木材细胞壁进行活化等工艺对木塑复合材进行了研究和分析。实验样品按照国标GBl927—1943有关规定进行测试，并结合傅立叶红外光谱和扫描电镜探讨了各因素对AMA—WPC材料接枝率及性能的影响。结果表明：改性后西南桤木木塑复合材料具有优异的物理、力学性能。与素材相比较，AMA—WPC的密度提高了59．8％，顺纹抗压强度提高了76．7％，抗弯强度提高了90．4％，抗弯弹性模量提高22．2％，端面硬度提高102．3％，径面硬度提高153．6％，弦面硬度提高152．2％，吸水率降低56．7％，湿膨胀率降低19．0％。     

Evaluation of Strength Performance of Finger-jointed Lumbers Using Three Kinds of Nondestructive Techniques

Resonance flexural vibration（Fast Fourier Transform, FFT）, ultrasonic wave（Pundit） and stress wave（Metriguard） techniques were examined as means of evaluating the static modulus of elasticity （MOE） and predicting the modulus of rupture （MOR） of finger-jointed lumber specimens made with four kinds of Eucalyptus （Eucalyptus. citriodora, E. exserta, E. grandis x E. urophylla and E. grandis）. Dynamic MOE was calculated from frequency and time obtained from forced vibrations and sounds induced in the four species of finger-jointed specimens. It was found that correlation coefficients between density and static MOE and dynamic MOE were statistically significant at the 0.01 level. And it was also found that the three nondestructive techniques can provide rapid and accurate means to determine the MOE, and the dynamic MOE was more accurate to predict static MOE than density. But the correlation coefficient between dynamic MOE, static MOE and MOR were lower than results reported by other researchers for solid wood, and were not statistically significant. It can be concluded that the three nondestructive techniques are useful for evaluating the MOE, but not suitable for predicting the MOR of finger-jointed.     

胶合板胶合效果评价方法探讨

现行胶合板标准采用传统的胶合强度指标(含木破率)评判胶合板的胶合性能具有一定的局限性。本文通过对胶合板胶合强度的分析和胶合界面的观察，包括显微观察，提出以胶合有效性、木材破坏率和胶合层剪切弹性模量或其综合评分为衡量指标，是评判胶合板胶合效果较为客观的方法。     

间伐小径木指接技术研究

间伐材指接胶合加工，变短材为长材，弯材为直材，为合理，有效利用间伐材开辟了新路。对间伐材木材含水率，指接端压的大小和时间，指接后养护时间，涂胶量，指榫规格等对指接材抗弯强度的影响进行了研究，并测定了苯酚，间苯二酚，甲醛树脂胶胶合的指接材快速老化性能。     

板式家具结构强度分析

50年代后期,Kotas对五面箱体的结构强度进行了研究,并且写了一本家具设计手册。Eckelman从板式部件的接合强度及家具的整体结构强度做了许多研究,他提出了板件的刚度与各种形式角接合变形的关系。他和Rabiej对带有横搁板和中隔板的柜体作了综合分析,得出计算公式,可用其计算三角固定一角自由条件下的柜体在受力时的变形。国内主要在家具力学性能测试方面,标准制定方面做了一些研究,在结构强度分析方面尚未进行过研究。     

Effect of board density on bending properties and dimensional stabilities of MDF-reinforced corrugated particleboard

We investigated the bending properties of composite boards produced by reinforcing both sides of corrugated particleboard with medium-density fiberboard (MDF). Thickness swelling and linear expansion (LE) were measured to assess the dimensional stabilities of the composite board. Although the apparent density of the composite board was 0.48g/cm³, its strength was found to be equivalent to that of 18-type particleboard as described in JIS A 5908. The boards parallel/perpendicular anisotropy in strength was 0.9. The modulus of rupture (MOR) of the composite board increased with board density only up to a certain density, beyond which the MOR was constant. On the other hand, the thickness swelling of both corrugated particleboard and the composite board was smaller than that of flat-type particleboard, satisfying the JIS A 5908 standard of 12%. Linear expansion (soaking in water of ordinary temperature for 24h) of corrugated particleboard was 0.7%–0.9% in the parallel direction and 2.1%–3.1% in the perpendicular direction; hence, anisotropy in linear expansion existed in the corrugated particleboard. The linear expansion of the composite board was 0.6%–0.9% in the parallel direction and 1.8%–2.5% in the perpendicular direction. Although the LE of the composite board was lower than that of corrugated particleboard, it is necessary to improve the LE of composite board for practical use.     

Intratree Variability of Tensile Strength Parallel to Grain in Chinese Fir and 1-214 Poplar from Plantation

The variation of tensile strength parallel to grain in Chinese fir and 1-214 poplar wood from plantations was studied in this paper. Aaccording to the national standards The Testing Methods for Physical and Mechanical Properties of Wood （GB 1927 to 1943 -- 1991）, the small clear wood samples were cut and tested, which represent the south and north of trees with heights of 1.3, 3.3, 5.3 and 7.3 m. The results showed： the tensile strength parallel to grain of the north wood was higher than that of south wood. ANOVA shows that the tensile strength parallel to the grain with height is of significant difference （at 0.05 level）.     

纤维性质对成纸性能的影响

对纤维的三个基本性质－长度、强度和粗度对纸性的影响进行了综述，着重讨论了对强度性质的影响。     

中国林业科技实力评价

本文采用指标评价分析法构建了中国林业科技实力评价指标体系,并就人员、经费、课题、成果、科研仪器设备、科技信息、论文发表数、技术贸易和国际科技合作与交流9个主要指标进行了评价,结果是林业科技基础良好,实力较弱且组合效益欠佳。研究亦指出,人员“结构性断层”与“结构性老化”现象应予注意。